NaviSound EchosoundersRESON products are used in all parts of the world for hydrography, dredging and surveying activities. RESON’s equipment is well-known and used by dredgers and hydrographers all over the world. To monitor the activities RESON supplies software. Each application of PDS2000 is tailored to the job.
The products used by dredging companies are:
- PDS2000 software
- Navisound Singlebeam Echo sounders
- SeaBat Multibeam Echo sounders
The reasons why RESON products are popular in the field are:
- Robustness
- Well-proven in the field
- Easy to use
- Reliability
- Results are shown immediately
- Global support
PDS2000 is software used for Hydrography and Dredge visualisation and guidance. Each module is tailored to the needs of the specific job. PDS2000 is written for hydrographers and dredgers to fulfil the requirements as efficiently as possible.
PDS2000 has dedicated modules for:
- Excavator/Backhoe dredger
- Clamshell/Grab cranes
- Trailing suction Hopper Dredger
- Cutter dredger
- Bucket dredger
- Rock dump / stone dump vessel
- Plough vessels
- Singlebeam survey
- Multibeam survey
- Magnetometer survey
NaviSound Singlebeam Echosounder
Singlebeam echosounders, such as the NaviSound series are used for pre-survey, out survey and to monitor the progress of the survey. To monitor the sediment layer dual frequency echosounders, such as the NaviSound 215, 420, 515 and 520, are used. The NaviSound dual frequency echosounders operate standard at 210kHz and 33kHz.
SeaBat Multibeam Sonars
The SeaBat multibeam systems are used to monitor the dredged area. The results are used in PDS2000-Dredge as seabottom layers to be dredged. RESON SeaBat systems are also used for rockdump activities and inspection projects on pipelines and rigs.
Because of the number of beams and the algorithms developed by RESON, bottom detection is very accurate, even in harsh conditions.
To the top of the page
